Home > Hard Drive > How To Install A Second Sata Hard Drive In Windows 7

How To Install A Second Sata Hard Drive In Windows 7


Several functions may not work. Volume label is nothing other than the name you want it to be called. And there are some ways to partition the hard drive actually, say, partition the hard drive under Disk Management or use the third party partition manager tool like EaseUS partition Master For NTFS the default cluster size is 4K which is pretty much the best tradeoff between speed and storage space. his comment is here

When dealing with IDE you need to set the jumpers correctly. Without a specific model number one cannot be specific. 0 #3 carrottop Posted 08 May 2009 - 06:34 PM carrottop New Member Topic Starter Member 2 posts Thanks Neil...I have a IDE secondary master/slave solved Setting ata drives(master-slave) solved Master and slave drives. Cable Select is defined in the ATA-2 and ATA-3 specifications.

How To Install A Second Sata Hard Drive In Windows 7

Mine is an ASUS w/945P Chipset with Pentium Dual Core 2.66Ghz/533MHz Front Side Bus. Now that I have shut it down, when I power it up it is repeating the error message and will not load Windows. To add another set of drives, repeat the process, this time choose the "Secondary Master" and "Secondary Slave" fields. On Intel boards, for example, SATA II ports tend to be black; SATA III ports are blue.

  1. The Master drive goes on the black connector at the end of the cable, the slave drive connects to the gray connector in the middle and the host adapter connects to
  2. IDE secondary master/slave Primary IDE Slave not detedted in BIOS SETUP UTILITY IDE Master, IDE Slave, SATA 1 2 3 4 Not Detected IDE Primary Master (Not Detected) solved Compaq Deskpro:
  3. I hope this helps.
  4. Protect the drive from static discharge by wearing a grounded wrist strap.
  5. HowStuffWorks - How IDE Controllers Works IDE devices use a ribbon cable to connect to each other.
  6. A wizard will pop up and walk you through this process.
  7. The comment appears during boot.
  8. These ports each allow only ONE HDD on the port, so there is no such thing as Master and Slave for SATA devices.
  9. Boot order is Onboard Floppy Drive, Onboard SATA Hard Drive, IDE Hard Drive, Onboard CD-ROM Drive.
  10. So, I ran a test, copied it and pasted above.

This is my first experience of such a problem and I have to confess I have no idea how to deal with it. Standard 40-pin ATA interface cable or an 80-conductor cable if running UATA66/100 (max length: 18 inches). Back to top #10 dickster dickster Just trying to fit in. Ide Hard Drive Jumper Settings The older 40-wire and the newer 80 wire are both 40-pins!

A Cable Select cable can be used with master/slave drive jumpering. How To Connect Two Sata Hard Disk In One Pc Future for ATA In order for the ATA interface to cope with the increased data clock rate in the future, a proper terminator has to be applied to prevent "ringing" in For that you will have to pull off both side panels to your case. try this Yesterday I powered it up to copy the error message for you and to my surprise it booted and loaded Windows.

When you try to install a really big hard drive into a lot of older systems, you'll find that the BIOS is only capable of seeing 137 GB. Hard Drive Configuration No problem: just buy and install another hard drive. Community Q&A Search Add New Question How do I reboot my computer? You'll need to fdisk this.

How To Connect Two Sata Hard Disk In One Pc

Thanks for voting! Jump to content FacebookTwitter Geeks to Go Forum Hardware Hardware, Components and Peripherals Welcome to Geeks to Go - Register now for FREE Geeks To Go is a helpful hub, where How To Install A Second Sata Hard Drive In Windows 7 If not, open the case and be sure all wires/ribbon cables are fully plugged in, Go to my computer and see if the drives show. How To Install A Second Hard Drive Windows 10 All Rights Reserved Tom's Hardware Guide ™ Ad choices Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get

If you're dual booting then Fat32 would probably be a good idea if the other OS can't read NTFS. this content And that is a 40/80 PIN flat cable with 3 IDC connectors. Back to top #17 dickster dickster Just trying to fit in. But on more recent mobos that is not so - you have a separate place in BIOS Setup to specify which of your several devices is the one you boot from. How To Partition A Hard Disk

Privacy Policy | License | Terms & Conditions | Uninstall | Resource | Data Recovery Solution | iPhone Recovery | Android Recovery You also can partition hard disk with it. You will have to restart your computer again. That way, if I have trouble, I can insert a bootable disk in either the floppy unit or the optical drive and it will boot from there.Because of the old rule

If you do it right, the BIOS setup screen appears. 2 If prompted for a password, enter it and press the "Enter" key. 3 Navigate to the "CMOS Setup" and press Second Hard Drive Not Showing There is no IDE Hard Drive in my system. Just clicking next until you get here.

The 4 extra pins are used for supplying power to the drive.

Burn this in to your brain kids. Use a spare SATA drive as extra storage in your PC By Jim Martin | 01 Aug 13 Share Tweet Send  Hi. From the horses mouth Here are some quotes from leading websites about connecting IDE devices: Intel - Installing the 80-Conductor IDE Cable The 40-pin 80-conductor cable is orientation specific. Ide Drive A drive can only transfer as fast as the slowest device on the channel.

Related Resources solved In my bios, Primary IDE Master and Slave are not detected. Jump to content Sign In Create Account Search Advanced Search section: This topic Forums Members Help Files Calendar View New Content PC Pitstop Members Forums Calendar More PC Pitstop Turn off the power to the host system before installation. The case screws are bigger than the ones used to screw in your CD drives.

In order to use Cable Select jumpering, several conditions must be met. Wish we could find out if this is new or old prob. Wonder what connects to where on the cable?